Florida Roofing Exam Topics and Calculations
Each page works through one testable topic in depth: what the exam is actually checking, the order to run the calculation, and the mistakes that most often produce a wrong answer under time pressure.
Trade topics
- Trade exam topicRoof Squares and Material Takeoff CalculationsHow to convert roof area into squares, apply waste, and build a defensible material takeoff for the Florida roofing trade exam.Read
- Trade exam topicRoof Slope and Pitch Calculations for the Trade ExamConvert between rise-over-run slope, pitch, degrees, and slope factors, and apply them correctly to roofing area and rafter problems.Read
- Trade exam topicUnderlayment and Fastening RequirementsStudy underlayment types, slope-dependent application, and fastening patterns as a code-navigation problem rather than a memorization exercise.Read
- Trade exam topicShingle Installation and Wind Rating RequirementsConnect shingle nailing patterns, exposure, starter and ridge treatment, and wind classification into one exam-ready framework.Read
- Trade exam topicTile Roofing System FundamentalsStudy concrete and clay tile roofing as a layered system: deck, underlayment, attachment method, and dead load.Read
- Trade exam topicMetal Roof Panel SystemsCompare exposed-fastener and standing-seam metal systems, and study thermal movement, attachment, and detailing.Read
- Trade exam topicLow-Slope and Modified Bitumen SystemsStudy built-up, modified bitumen, and single-ply low-slope systems with attention to drainage, attachment, and terminations.Read
- Trade exam topicRoof Ventilation Calculation GuideCalculate required net free ventilating area, balance intake and exhaust, and avoid the common short-circuit mistakes.Read
- Trade exam topicFlashing and Penetration DetailingStudy valley, wall, chimney, curb, and pipe penetration flashing as a water-management system for the trade exam.Read
- Trade exam topicTear-Off, Recover, and Re-RoofingLearn when removal is required, when recovering is permitted, and how deck evaluation drives the decision.Read
Business & Finance topics
- Business & Finance exam topicMarkup vs. Margin CalculationsMaster the single most commonly confused calculation on the contractor Business & Finance exam.Read
- Business & Finance exam topicJob Costing and Overhead RecoverySeparate direct cost from overhead, allocate overhead defensibly, and compare estimated to actual results.Read
- Business & Finance exam topicReading Contractor Financial StatementsInterpret the balance sheet, income statement, and cash flow statement, then compute the ratios the exam expects.Read
- Business & Finance exam topicPayroll Taxes and Labor BurdenBuild a fully burdened labor rate and understand the payroll obligations the exam expects contractors to know.Read
- Business & Finance exam topicConstruction Lien Law ConceptsUnderstand the purpose, participants, notices, and deadlines that structure construction lien questions.Read
- Business & Finance exam topicLabor Productivity and Estimating RatesConvert crew production into hours, cost per square, and schedule — and adjust for real job conditions.Read
- Business & Finance exam topicChange Order Pricing and DocumentationPrice changes correctly and document authorization before the work proceeds.Read
- Business & Finance exam topicBonding and Working CapitalUnderstand bond types, what sureties evaluate, and how working capital limits bonding capacity.Read